Assurance Continuity - Cisco IPS v6.2(1) IPS 4200 Series Sensors (IPS-4240, IPS-4255, IPS-4260, IPS-4270); Cisco AIP-SSM-10, AIP-SSM-20 and AIP-SSM-40; IDSM-2, AIM-IPS and NME-IPS

Date of Maintenance Completion: 10 December 2009

Product Type: IDS/IPS

Conformance Claim: EAL2 Augmented with ALC_FLR.1

PP Identifier: Intrusion Detection System System Protection Profile, Version 1.6, dated April 4, 2006 (Archived)

Original Evaluated TOE: 31 May 2007 - Cisco Intrusion Prevention System (IPS) v6.0 Cisco 4200 Series Sensors (IPS 4255, IDS 4250, IPS4240, IDS4215, IPS4260); Cisco AIP-SSM-10 and AIP-SSM-20 for the ASA; NM-CIDS; IDSM-2

CC Certificate

Security Target

Validation Report

Please note: These are for the Original Evaluated TOE; consequently, they do not refer to this maintained version, although they apply to the maintained version.

Assurance Continuity Maintenance Report

Please note: This serves as an addendum to the VR for the Original Evaluated TOE

Readers are reminded that the certification of this product (TOE) is the result of maintenance, rather than an actual re-evaluation of the product. Maintenance only considers the affect of TOE changes on the assurance baseline (i.e. the original evaluated TOE); maintenance is not intended to provide assurance in regard to the resistance of the TOE to new vulnerabilities or attack methods discovered since the date of the initial certificate. Such assurance can only be gained through re-evaluation.

Using a security impact analysis of the changes made to the TOE, which was provided by the developer, the CCEVS has determined that the impact of changes on the TOE are considered minor and that independent evaluator analysis was not necessary. A summary of the results can be found in the Maintenance Report, which is written in relation to the product's original validation report and Security Target. Readers are therefore reminded to read the Security Target, Validation Report, and the Assurance Maintenance Report to fully understand the meaning of what a maintained certificate represents.

PRODUCT DESCRIPTION

 

Added the AIM-IPS and NME-IPS module platforms and removed the NM-CIDS module platform from the TOE. The AIM-IPS and NME-IPS module platforms are replacement hardware for the NM-CIDS module. In addition, 1192 bug fixes were applied from Cisco IPS 6.0 to Cisco IPS 6.2(1).

Vendor Information

Cisco Systems, Inc.
Jennifer Gilbert
408-219-7889
jtgilber@cisco.com

http://www.cisco.com/