Assurance Continuity - Cybex SwitchView SC Series Switches for models SC420 (part number 520-753-503), SC440 (part number 520-721-503) and SC540 (part number 520-728-503) with revised firmware

Date of Maintenance Completion: 25 September 2009

Product Type: Peripheral Switch

Conformance Claim: EAL4 Augmented with ALC_FLR.2

PP Identifier: Peripheral Sharing Switch for Human Interface Devices Protection Profile, Version 1.2 (Archived)

Original Evaluated TOE: 21 April 2009 - Cybex SwitchView SC Series Switches (Models SC420 (part number 520-753-502), SC440 (part number 520-721-502), and SC540 (part number 520-728-502)

CC Certificate

Security Target

Validation Report

Please note: These are for the Original Evaluated TOE; consequently, they do not refer to this maintained version, although they apply to the maintained version.

Assurance Continuity Maintenance Report

Please note: This serves as an addendum to the VR for the Original Evaluated TOE

Readers are reminded that the certification of this product (TOE) is the result of maintenance, rather than an actual re-evaluation of the product. Maintenance only considers the affect of TOE changes on the assurance baseline (i.e. the original evaluated TOE); maintenance is not intended to provide assurance in regard to the resistance of the TOE to new vulnerabilities or attack methods discovered since the date of the initial certificate. Such assurance can only be gained through re-evaluation.

Using a security impact analysis of the changes made to the TOE, which was provided by the developer, the CCEVS has determined that the impact of changes on the TOE are considered minor and that independent evaluator analysis was not necessary. A summary of the results can be found in the Maintenance Report, which is written in relation to the product's original validation report and Security Target. Readers are therefore reminded to read the Security Target, Validation Report, and the Assurance Maintenance Report to fully understand the meaning of what a maintained certificate represents.

PRODUCT DESCRIPTION

The SwitchView firmware was updated to accommodate the following implementation details:

 

1.    Firmware in the “N” processors and “plus-one” processor was changed to enable it to process Smart Card Interface Device packets larger than 64 bytes.

2.    Firmware in the “N” processors and “plus-one” processor was changed to correct processing for keyboard country codes.

 

New TOE identification numbers were assigned to identify the changed TOE.

Updates to Cybex SwitchView SC Series Switches for models SC420, SC440 and SC540 and Cybex SwitchView SC Series developer design and test evidence documents.

Vendor Information

Avocent Corporation
Joe Rosswog
256-430-4000
256-430-4030 (Fax)
joe.rosswog@avocent.com

http://www.avocent.com