NIAP: View Technical Decision Details
NIAP/CCEVS
  NIAP  »»  Protection Profiles  »»  Technical Decisions  »»  View Details  
TD0611:  Channels Outside Regulatory Domain

Publication Date
2021.09.29

Protection Profiles
MOD_WIDS_V1.0

Other References
WIDS SD v1.0, FAU_WID_EXT.2

Issue Description

FAU_WID_EXT.2.1 has a selection for channels outside the regulatory domain, but the Channels Monitored tests for the SFR require channels outside regulatory domain to be monitored.

Resolution

The Channels Monitored tests for FAU_WID_EXT.2.1 in the Supporting Document for WIDS PP-Module v1.0 are modified as follows, with strikethroughs denoting deletion and underlines denoting addions:

Test 1:  Channels on On 5GHz band

Step 1: Configure the TSF to monitor the channels as selected in the SFR.

Step 2: Deploy an AP on at least 2 different channels within the regulatory domain on 5GHz band.

Step 3: Deploy an AP on at least 2 different channels outside the regulatory domain on 5GHz band.

Step 43: Verify that the AP gets detected on each channel tested.

 

Test 2:  Channels on 2.4GHz band

Step 1: Configure the TSF to monitor the channels as selected in the SFR.

Step 2: Deploy AP on at least 2 different channels within the regulatory domain on 2.4GHz band.

Step 3: Deploy AP on at least 2 different channels outside the regulatory domain on 2.4GHz band.

Step 43: Verify that the AP gets detected on each channel tested.

 

Test 3:  Channels on 4.9GHz band (if selected)

Step 1: Configure the TSF to monitor the channels specified in the SFR.

Step 2: Deploy AP and set to channels within the 4.9 GHz band outlined in the TSS.

Step 3: Verify that the AP gets detected on each channel tested.

 

Test 4:  Non-standard channel frequencies (if selected)

Step 1: Configure the TSF to monitor the channels as selected in the SFR.

Step 2: Deploy AP on at least 2 different channels on non-standard channel frequencies.

Step 3: Verify that the AP gets detected on each channel tested.

 

Test 5: Channels outside regulatory domain (if selected)

 

Step 1: Configure the TSF to monitor the channels as selected in the SFR.

Step 2: Deploy an AP on at least 2 different channels outside the regulatory domain on 5GHz band.

Step 3: Deploy AP on at least 2 different channels outside the regulatory domain on 2.4GHz band.

Step 4: Verify that the AP gets detected on each channel tested.

Justification

See issue description.

 
 
Site Map              Contact Us              Home