NIAP: Assurance Continuity
NIAP/CCEVS
  NIAP  »»  Product Compliant List  »»  Product Entry  »»  Assurance Continuity  
Assurance Continuity - Seagate Secure TCG SSC Self-Encrypting Drives

Date of Maintenance Completion:  2020.06.03

Product Type:    Encrypted Storage

Conformance Claim:  Protection Profile Compliant

PP Identifier:    collaborative Protection Profile for Full Drive Encryption - Encryption Engine Version 2.0

Original Evaluated TOE:  2018.04.11 - Seagate Secure TCG SSC Self-Encrypting Drives

CC Certificate [PDF] Validation Report [PDF] Assurance Activity [PDF]

Administrative Guide [PDF]

Please note:  The above files are for the Original Evaluated TOE.  Consequently, they do not refer to this maintained version, although they apply to the maintained version. 

Security Target [PDF] * Assurance Continuity Maintenance Report [PDF]

Please note:  This serves as an addendum to the VR for the Original Evaluated TOE. 

* This is the Security Target (ST) associated with the latest Maintenance Release.  To view previous STs for this TOE, click here.

Readers are reminded that the certification of this product (TOE) is the result of maintenance, rather than an actual re-evaluation of the product.  Maintenance only considers the affect of TOE changes on the assurance baseline (i.e. the original evaluated TOE); maintenance is not intended to provide assurance in regard to the resistance of the TOE to new vulnerabilities or attack methods discovered since the date of the initial certificate.  Such assurance can only be gained through re-evaluation. 

Using a security impact analysis of the changes made to the TOE, which was provided by the developer, the CCEVS has determined that the impact of changes on the TOE are considered minor and that independent evaluator analysis was not necessary.  A summary of the results can be found in the Maintenance Report, which is written in relation to the product's original validation report and Security Target.  Readers are therefore reminded to read the Security Target, Validation Report, and the Assurance Maintenance Report to fully understand the meaning of what a maintained certificate represents. 

Product Description

Assurance Continuity Maintenance Report:

·        Seagate submitted an Impact Analysis Report (IAR) for the twenty-five Common Criteria certified models listed above

·        The IAR specifies that there are two security relevant firmware changes; both firmware changes fixed incorrect reporting issues related to the security subsystem but did not impact the underlying security architecture. There are no changes to the development environment.

·        Code change did not have any impact on the developer evidence of the validated TOE.

·        The changes to the ST and other documents were limited to document version with the addition of the new firmware version.

Changes to TOE:

Firmware versions A003 and 0004 are both based upon existing firmware revision 0003. Firmware versions TFA2, NFA2, SFA2, and EFA2 are each based on existing firmware revisions TF01, NF01, SF01, and EF01, respectively.

The hardware models use the firmware versions as shown in the following table.

Validated Hardware Versions

New Firmware Versions

XS800LE70024, XS1600LE70024, XS3200LE70024, XS6400LE70024, XS400ME70024, XS800ME70024, XS1600ME70024, XS3200ME70024, XS960SE70024, XS1920SE70024, XS3840SE70024, XS7680SE70024, XS7680TE70024, XS3840TE70024, XS16360TE70024

A003

0004

ST3000NM004A, ST4000NM013A

TFA2

ST3000NM005A, ST4000NM015A

NFA2

ST4000NM012A, ST8000NM008A, ST6000NM025A

SFA2

ST4000NM014A, ST6000NM033A, ST8000NM010A

EFA2

 

 

Vendor Information

Logo
Seagate Technology
Seagate Security Certification Contracts
+1 (952) 402-2356
security.cert.contracts@seagate.com

http://www.seagate.com/
Site Map              Contact Us              Home