NIAP: Assurance Continuity
  NIAP  »»  Product Compliant List  »»  Product Entry  »»  Assurance Continuity  
Assurance Continuity - Xerox® AltaLink™ C8130 / C8135 / C8145 / C8155 / C8170 & B8145 / B8155 / B8170 with HDD

Date of Maintenance Completion:  2021.11.16

Product Type:    Multi Function Device

Conformance Claim:  Protection Profile Compliant

PP Identifier:    Protection Profile for Hardcopy Devices Version 1.0

Original Evaluated TOE:  2021.08.20 - Xerox® AltaLink™ C8130, C8135, C8145, C8155, C8170 & B8145, B8155, B8170 with HDD

CC Certificate [PDF] Validation Report [PDF] Assurance Activity [PDF]

Administrative Guide [PDF]

Please note:  The above files are for the Original Evaluated TOE.  Consequently, they do not refer to this maintained version, although they apply to the maintained version. 

Security Target [PDF] * Assurance Continuity Maintenance Report [PDF]

Please note:  This serves as an addendum to the VR for the Original Evaluated TOE. 

* This is the Security Target (ST) associated with the latest Maintenance Release.  To view previous STs for this TOE, click here.

Readers are reminded that the certification of this product (TOE) is the result of maintenance, rather than an actual re-evaluation of the product.  Maintenance only considers the affect of TOE changes on the assurance baseline (i.e. the original evaluated TOE); maintenance is not intended to provide assurance in regard to the resistance of the TOE to new vulnerabilities or attack methods discovered since the date of the initial certificate.  Such assurance can only be gained through re-evaluation. 

Using a security impact analysis of the changes made to the TOE, which was provided by the developer, the CCEVS has determined that the impact of changes on the TOE are considered minor and that independent evaluator analysis was not necessary.  A summary of the results can be found in the Maintenance Report, which is written in relation to the product's original validation report and Security Target.  Readers are therefore reminded to read the Security Target, Validation Report, and the Assurance Maintenance Report to fully understand the meaning of what a maintained certificate represents. 

Product Description


Xerox Ref


TSF Impact



New IIT v17.15 Binary

Fix: Due to a factory fire, we needed to update the scanner software to support new substitute scanner hardware.

The code change was to enable the IIT (Scanner) software to recognize which part is installed at power up and use the correct image quality values and controls based on which scanner hardware is installed on the device.

Minor code fix


The update enables the TOE to be compatible with the new hardware. Neither the hardware nor the software makes any changes to the TSF or impacts the TOE’s security functions.


New FPGA v1.24 SW

Fix: Update to the FPGA Capella x. to D5.3 MC baseline to add support for the new scanner part.

Minor code fix


Similar to DAR-556911, this is a compatibility change and makes no changes to the TSF or impacts the TOE’s security functions.


Wrong Fault /66.396

Fix: Wrong fault was displayed when DADH (power distribution) cable was disconnected or is bad.  This can cause confusion to service and lead to wrong part replacement.  Fix was to raise the correct fault code 66.396.

Minor code fix

The change to correct the fault code does not affect the TSF or any claimed security functions.


Wrong Video graphic displayed for Mid/Low speed scanner

Fix:  Mid/Low devices are displaying High machine graphics in local control panel when a jam occurs.  Fix was to use the correct video for the Mid/Low speed model.

Minor code fix

The graphic fix does not affect the TSF or any claimed security functions.

Vendor Information

Mike Kirby
Site Map              Contact Us              Home